Fencing - High Tensile

These products are high tensile wire adhered to a polymer webbing which makes up the rail width. The high tensile fence product line consists of a 5" wide rail, 4" wide rail, single strand polysafe, polysteel and polycharge wires. This wide range of products offers multiple fencing combinations.

The rails are designed to flex 6"-8" on impact creating "the horse friendly fence." High tensile wire is fully encased and gives a high break strength, the polymer gives the safety and visibility. The patented bracketing system makes the fence act like a belt through loops which offers a continuous rail. Unlike most fencing systems, ANY impact on the fence is taken over the complete fence line instead of just one section.

High tensile fencing can be used for commercial, equine, cattle, ratites and exotic animals.

High Tensile Installation Tips

• Do not crimp, bend flat or kink High Tensile. High Tensile is very strong, however, if it is kinked, it can weaken the wire.
• Unroll all rail - do not pull rail off the roll.
• Do not nail into the rail - all brackets are made to go over the rail so the rail is like a belt through a loop.
• Staple brackets and barbed fence.
• All corners and posts should be diagonally braced and set in concrete.
• Line posts may be driven or augured

Complete installation guidelines are provided with all orders. Always refer to these or telephone us for advice.